公司新聞
銑刨機租賃的分類介紹
來源：http://www.baoxiaomei.cn/ 日期：2023-02-25
般路面銑刨機是瀝青路面養護施工的設備，主要作用于清除馬路和城市道路瀝青混凝土表面產生的凹凸、油浪、網紋、車轍等瑕疵表面。將損壞的舊路面磨平再鋪設新路面，是最經濟、最現代化的養護方法之一。
General pavement milling machine is the equipment for asphalt pavement maintenance and construction, which is mainly used to remove the concave-convex, oil wave, mesh, rut and other defects on the asphalt concrete surface of roads and urban roads. It is one of the most economical and modern maintenance methods to smooth the damaged old pavement and then pave the new pavement.
由于其設備工作效率高，施工工藝簡單，銑削深度易控制，冷再生租賃之后操作方便靈活，操作性好，碾磨舊材料直接回收，在城市市政道路和高速公路養護工程中得到廣泛應用。
Due to its high working efficiency, simple construction process, easy control of milling depth, convenient and flexible operation after cold regeneration lease, good operability, and direct recycling of grinding old materials, it has been widely used in urban municipal roads and highway maintenance projects.
根據銑削的形式，區分成冷銑式和熱銑式。冷銑型具有功率大、刀具磨損快、切削材料粒徑均勻等特點。它可以配備灑水裝置來噴水，應用廣泛。產品已成為一個系列，由于增加了加熱裝置，熱銑型更為復雜，通常用于道路再生。
According to the form of milling, it can be divided into cold milling and hot milling. The cold milling type has the characteristics of high power, fast tool wear and uniform cutting material particle size. It can be equipped with sprinklers to spray water, and is widely used. The product has become a series. Due to the addition of heating device, the hot-milling type is more complex and is usually used for road regeneration.
依照銑轉子的旋轉方位，劃分為順銑式還有逆銑式。在銑床運行時，轉子的旋轉方向與砂輪的旋轉方向相同，為正銑型，反之為反銑型。
According to the rotation direction of the milling rotor, it can be divided into forward milling and reverse milling. When the milling machine is running, the rotation direction of the rotor is the same as that of the grinding wheel, which is the forward milling type, and vice versa.
根據銑轉子的位置，劃分成后懸掛式、中間懸掛式和后橋同軸式。后懸架類型是銑削轉子懸掛在后橋后部;中間懸掛類型是銑削轉子在前后軸之間;后橋同軸類型是銑削轉子與后橋同軸布置。
According to the position of milling rotor, it is divided into rear suspension type, middle suspension type and rear axle coaxial type. The rear suspension type is milling rotor suspended at the rear of the rear axle; The middle suspension type is milling the rotor between the front and rear axles; The coaxial type of rear axle is the coaxial arrangement of milling rotor and rear axle.
根據銑轉子的工作寬度，可分為小、中、大三種類型。小型銑刨機的銑刨寬度為300-800mm，銑刨轉子的驅動操作以機械為主，特別適用于占地面積小于100m2的地面加工;中型銑床的銑刨寬度為1000-2000mm，銑刨轉子的驅動操作以液壓為主大型銑床的銑削寬度大于2000mm，一般與其它機床配合使用，用于石膏的仿形，銑床的傳動方式以液壓傳動為主。
According to the working width of the milling rotor, it can be divided into three types: small, medium and large. The milling width of the small milling machine is 300-800 mm, and the driving operation of the milling rotor is mainly mechanical, especially suitable for ground processing with an area less than 100 m2; The milling width of the medium-sized milling machine is 1000-2000mm. The driving operation of the milling rotor is mainly hydraulic. The milling width of the large milling machine is more than 2000mm. It is generally used in conjunction with other machine tools for gypsum profiling. The driving mode of the milling machine is mainly hydraulic.
還有依據傳動方式又能分為機械式和液壓式。銑刨機租賃公司的工程說到：機械工作可靠，維修方便，傳動效率高，制造成本低，但結構復雜，操作不輕，運行效率低，牽引力小，適用于淺路塹的小型路面維修工作;液壓式結構緊湊，輕便、柔性、牽引力大，但制造成本高，維修困難，適用于中、大型路塹和路面的深度養護。
It can also be divided into mechanical type and hydraulic type according to the transmission mode. The project of the milling machine leasing company said: the machine works reliably, is convenient for maintenance, has high transmission efficiency, and low manufacturing cost, but has complex structure, light operation, low operating efficiency, and low traction, which is suitable for small pavement maintenance work of shallow cutting; The hydraulic type has compact structure, portability, flexibility, and great traction, but it has high manufacturing cost and is difficult to maintain. It is suitable for deep maintenance of medium and large cutting and pavement.
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：